When we wear a watch every day, the watch case will inevitably be scratched. Most people are still acceptable for minor scratches. If the scratches are heavy, take action. Otherwise it will seriously affect the wearing effect! The following watch home will tell you what to do if the watch case has scratches! As the surface of the case, there are basically two kinds of processes: polished and sanded, or both, to scratch the watch case, but also according to the original process, a large area of ​​the ball Class wear is easier to handle; but if there is a deeper hard scratch, it will be more troublesome, because the method of polishing or sanding is not enough to grind such scratches. Partial deep scratches on the case or strap. Before repairing, it is necessary to do local treatment first. Look at the position, such as the shell side of the case. It is even possible to use a fine scythe, and more to use oil stone. Under the magnifying glass, carefully flatten the deeper scratches and have deep scratches. Focus on polishing the oilstone first. This needs to be carried out under a magnifying glass. The purpose is to evenly smooth the scratches. When the scratches are basically ground and smoothed, select the sandpaper with the right size and grind along the original sanding pattern. Usually the lines are The dial is radially centered, so this is a careful work, a little bit to come, the effect of grinding will be good. It is recommended that sandpaper be used in the jewelry industry, preferably imported. All the scratches on the watch case and the strap, if you want to remove it or give the watch a look and feel, you can refer to this method. Straight lines are easier to handle. If the lines are concentric, you should use electric machines. It is not difficult to use sandpaper to scratch the surface of the case strap. It is not difficult to handle it with care. If the surface is polished, then the cloth polishing machine must be used. No. For case and strap with sanding and polishing process, sanding should be done first, then polishing and polishing, but it is necessary to cover the sanded parts that have been repaired. Simple You can use adhesive tape, and you can use a metal template for regular use. It is also used for covering when polishing. Check Shirt,Check Shirts For Men,Check Shirt 100% Cotton,Check Shirt Long Sleeve ShaoXing TianHao Garment Making Co., Ltd , https://www.sxthapparel.com