After the frizzy shoes are soiled, they cannot be wiped off by dry rubbing. Can be scrubbed with a damp cloth, wiped and placed in a ventilated cool place. When the leather upper is dry and not dry, use a hard bristle brush to brush some napped powder. Brush lightly on the upper and the upper will be fluffy. After continuous blow drying, the hair can be restored to its original shape.
Winter is coming. It is estimated that each mm has more than one pair of flipper shoes. How to maintain is a headache. This is the most thorough version of this aspect I have seen in one place and I hope it will help everyone.
Here's to introduce specific maintenance methods, you can try:
Materials: Brushes, shoes, cleaners, retreads, sponges, hygiene balls.
Steps: 1. Remove ash. (Available vacuum cleaner) (There are mm recommended old bath towels, I did not even try.)
2. Hold up with shoe support first. (Wooden shoe supports can change with shoe shape)
3. Use a special brush. Note that the copper wire surface mainly deals with heavily soiled areas and polished areas. First use the rubber surface to brush in one direction, the side seams use the side. Focus on the stain and rub it with copper wire.
4. Use a damp sponge to wipe the upper wet. The purpose is to mainly deal with water-soluble substances.
5. Shake the cleaner spray on the surface. Repeatedly brushing back and forth with a squeegee brush removes stains on both sides of the fiber, and the dirty foam is blotted with a moisture sponge.
6. Dry for ten minutes, wait for the hair to dry slightly, and when it is wet, use a rubber face to brush in one direction so that the hair can spread out and finish.
7. Let it dry for half an hour. After the vamp is dry, the inside of the shoe shall be covered with newspapers. The refresher should be evenly sprayed 15 centimeters from the shoe. Update agents contain brighteners, colloids (enhance the adhesion of other substances), pigments, solvents (soluble mixture) and so on. The purpose of the spray renewal agent is mainly complementary color. Black shoes and other wear for a long time easy to anti-white, it is best to use color update agent.
8. After drying, brush it with rubber and let the color match.
9. Finally put desiccant collection.