The waste plastics that have been sorted and sorted can be put into the crusher for crushing and cleaning. Generally, the crusher with the cleaning dragon is used, and a bracket of about 1.5 meters height is placed next to the crusher, and a bucket is placed on the drum. For the solution or detergent, the detergent is introduced into the pulverizer with a flow-controlled tube so that the detergent (in addition to a pipe to be added to the water) during the pulverization process and the waste plastic are sufficient in the pulverizer. The pulverized material from the pulverizer directly enters the cleaning pool. The cleaning pool generally has a size of more than 8 meters, a width of 1.2 meters, and a depth of 1 meter. The bottom of the pool has a drain hole, and the cleaning pool needs to be installed with 3 to 4 channels to guide the pulverized film material. The flow guiding device, the flow guiding device can distribute 10 or so ∮4 holes on one side of the 6-minute tube, and form a directional when the water in the tube is sprayed from the hole to the pulverized material on the water surface. Flowing, an automatic hopper is placed at the other end of the cleaning tank, so that the directional pulverized material is sent to the leaching area to be processed through the automatic hopper. Printed Wax Fabrics,Printed Polyester Fabric,One Side Printed Wax Fabrics,Polyester Printed Wax Fabrics Changxing Dingqiang Textile Co., Ltd. , https://www.dingqiangtextile.com