Testing with environmental test equipment is a relatively scientific and standardized work. In order for testers to obtain more accurate test data, we need to strictly follow the test procedures. Also for constant temperature and humidity test chambers, this should be the case when testing test samples.
Drop
Cloths are used for ultimate protection against smudges, spills, dripping. Used
especially by painters to protect furniture or floors.
No matter
what weight or length you need, chances are we have the perfect drop cloth for
your home improvement project.
other
any size according to customers' requirement
packing:
bale carton, polybag packed, shrink wrapped
Quality
control:
when confirmation
is made, we will start production from raw material. all raw material is
inspected. such as cotton and yarn
cotton or
yarn quality is ok, the go ahead to weave and sew and pack and load ship. each
step is strictly inspected
Why Us?
Some of
the attributes that have made us the most preferred business partners are:
•
Customized solution
•
Competitive pricing
• Timely
delivery
•
Excellent customer support
Drop Cloth,Cover Floor Wires,Drop Cloth Dust Sheet,Cover Asbestos Floor Tiles ZIBO BEST WAY INTERNATIONAL TRADING CO.,LTD , https://www.zbbestway.com
Next, we will make some simple descriptions on the correct way of placing the sample to be tested in the constant temperature and humidity test chamber. When the test item is placed in the test area of ​​the test box, how to place it is correct, and whether there is a requirement in the specification. What are the related aspects?
First, the sample to be tested should be placed in the middle of the box of the constant temperature and humidity test chamber. It should not cover the air duct above, nor can it be placed directly on the surface of the box. It needs to be adjusted according to the size, shape, weight and quantity of the sample to be tested. The distance between the sample holders and the placement method. If an external power supply is required, the wires should be connected to the test hole. Do not let the wires entangle them. Pay special attention to the absence of damage or other dangerous factors.
Secondly, for some small parts, high and low temperature tests are required. Because the sample racks standard equipment manufacturers are mostly perforated, the aperture is about 5*5. If the product is small, the manufacturer should be informed in advance. The rack is encrypted or the tray is prepared by itself.
For the material of the sample to be tested, if the sample to be tested is liquid, it must be packed in a container of moderate size; if it is a volatile, flammable, explosive, self-igniting sample, do not set too high temperature. At the same time, it is also necessary to avoid liquid spillage; if it is rubber, it is necessary to use a plate mat to prevent the rubber from melting and adhering to the sample holder after being heated at a high temperature, which is very troublesome to clean.
For the above-mentioned precautions and specifications of the sample placement of the constant temperature and humidity test chamber, I hope to attract everyone's attention. After all, it is always correct to follow safe and correct test procedures.
• Quality products